Service
ISO/IEC 17025 인증범위
Accreditation
마이크로프리시즌코리아는 Customized된 맞춤 교정 서비스를 지향합니다. 정밀 측정기의 모든 교정은 마이크로 프리시즌과 상담하십시오.
고객의 소중한 시간과 예산을 절감하는 방안을 제시하여 드리겠습니다.
고객의 소중한 시간과 예산을 절감하는 방안을 제시하여 드리겠습니다.
| ANSI-ASQ National Accreditation Board (ANAB) | ISO/IEC 17025:2017 |
| ANSI/NCSL Z540-1-1994 (R2002) | ANSI/NCSL Z540.3-2006 (R2013) |
SCOPE OF ACCREDITATION TO ISO/IEC 17025 : 2017
| Equipment / Parameter | Range | STD Equipment | |||
|---|---|---|---|---|---|
| I. Electrical- DC / LOW Frequency | DC Voltage Source | Up to 1.1 kV | Comparison to Multifunction Calibrator |
||
| DC Voltage Source | Fixed Values | 1 V 1.018 V 10 V |
Comparison to DC Voltage Stadard |
||
| DC Voltage Measure | 0 mV to 1 kV | Comparison to Multimeter | |||
| 1 kV to 10 kV | Comparison to High Voltage Meter with Probe | ||||
| DC Current Source | Up to 11 A | Comparison to Multifunction Calibrator |
|||
| 11 A to 1 000 A | Comparison to Multifunction Calibrator with Current Coil |
||||
| DC Current Measure | 0.1 nA to 1 A | Comparison to Multimeter | |||
| 1 A to 300 A | Comparison to Current Shunt Monitored with Multimeter | ||||
| Inductance Source | Fixed Points (1 kHz) | 100 uH to 10 H | Comparison to Standard Inductors | ||
| 1 kHz | 100 uH to 10 H | Comparison to Decade Inductors | |||
| Inductance Measure | 12 Hz to 1 kHz | 100 uH to 10 H | Comparison to RLC Digibridge | ||
| Resistance Source | Up to 330 MΩ | Comparison to Multifunction Calibrator |
|||
| 0 Ω to 100 GΩ | Comparison to Decade Resistance Box | ||||
| Resistance Source | Fixed Points | 0 Ω to 100 MΩ | Comparison to Multifunction Calibrator |
||
| 1 Ω to 10 MΩ | Comparison to Standard Resistors | ||||
| Resistance Measure | 0 Ω to 1 GΩ | Comparison to Multimeter | |||
| AC Resistance Measure | 12 Hz to 100 kHz | Up to 100 kΩ | Comparision to RLC Digibridge, Standard Resistors | ||
| AC Resistance Source | 10 Hz to 1 kHz | 1 Ω to 1 MΩ | Comparison to Standard Resistors | ||
| Capacitance Source | 1 kHz | 330 pF to 1.1 mF | Comparison to Multiproduct Calibrator | ||
| Capacitance Source | Fixed Points (1 kHz) | (1, 10, 100, 1 000) pF (10, 100, 1 000) nF |
Comparison to Standard Capacitor Set | ||
| Capacitance Measure | 1 kHz to 1 MHz | 1 pF to 1 nF | Comparison to Precision LCR Meter, RLC Digibridge | ||
| 1 kHz | 1 nF to 1 uF | ||||
| Electrical Stimulation of Thermocouple Indicators | Type B | 600 ℃ to 1 820 ℃ | Comparison to Multifunction Calibrator |
||
| Type C | 0 ℃ to 2 316 ℃ | ||||
| Type E | -250 ℃ to 1 000 ℃ | ||||
| Type J | -210 ℃ to 1 200 ℃ | ||||
| Type K | -200 ℃ to 1 372 ℃ | ||||
| Type L | -200 ℃ to 900 ℃ | ||||
| Type N | -200 ℃ to 1 300 ℃ | ||||
| Type R | 0 ℃ to 1 767 ℃ | ||||
| Type S | 0 ℃ to 1 767 ℃ | ||||
| Type T | -250 ℃ to 400 ℃ | ||||
| Type U | -200 ℃ to 600 ℃ | ||||
| Electrical Stimulation of RTD Indicators | Pt 385 | 100 Ω | -200 ℃ to 800 ℃ | Comparison to Multifunction Calibrator |
|
| Pt 3926 | 100 Ω | -200 ℃ to 630 ℃ | |||
| Pt 3916 | 100 Ω | -200 ℃ to 630 ℃ | |||
| Pt 385 | 200 Ω | -200 ℃ to 630 ℃ | |||
| Pt 385 | 500 Ω | -200 ℃ to 630 ℃ | |||
| Pt 385 | 1 kΩ | -200 ℃ to 630 ℃ | |||
| PtNi 385 | 100 Ω | -80 ℃ to 260 ℃ | |||
| Cu 427 | 10 Ω | -100 ℃ to 260 ℃ | |||
| AC Voltage Source | 10 Hz to 1 MHz | 220 uV to 220 V | Comparison to Multifunction Calibrator |
||
| 15 Hz to 1 kHz | 220 V to 1.1 kV | ||||
| AC Voltage Measure | 1 Hz to 300 kHz | Up to 10 mV | Comparison to Multifunction Calibrator |
||
| 1 Hz to 2 MHz | 10 mV to 10 V | ||||
| 1 Hz to 1 MHz | 10 V to 100 V | ||||
| 1 Hz to 100 kHz | 100 V to 700 V | ||||
| 60 Hz | 1 kV to 10 kV | Comparison to High Voltage Meter with Probe | |||
| AC Current Source | 10 Hz to 10 kHz | Up to 2.2 A | Comparison to Multifunction Calibrator |
||
| 10 Hz to 1 kHz | 2.2 to 11 A | ||||
| 60 Hz | 1 A to 550 A | Comparison to Multifunction Calibrator with Coil |
|||
| AC Current Measure | 10 Hz ~ 1 kHz | 5 uA to 100 uA | Comparison to Multimeter | ||
| 10 Hz ~ 5 kHz | 100 uA to 1 A | ||||
| 1 kHz | 1 A to 100 A | Comparison to Current Shunt with Multimeter | |||
| DC Power Source | 0.1 W to 11 kW | Comparison to Multifunction Calibrator |
|||
| AC Power Source | 60 Hz | 0.1 W to 12 kW | Comparison to Power Energy Calibrator | ||
| Oscilloscopes | Sine wave signal 50 Ω at 1 kHz 1 MΩ at 1 kHz |
1 mV to 6.6 V 1 mV to 130 V |
Comparison to Oscilloscope Calibrator, Active Head & RF Power Sensor | ||
| Pulse & Rise time 0.5 , 1 V p-p 1 Vp-p |
10 MHz 1 MHz |
||||
| Time Mark Output into 50 Ω | 2 ns to 5 s |
||||
| Leveled Sine Flatness | 50 kHz reference 50 kHz to 50 GHz |
||||
| Ⅱ. Electrical - RF/Microwave | Tuned RF Power, Relative Measure | 150 kHz to 26.5 GHz | -120 dB to 20 dB | Comparison to Spectrum Analyzer, Measuring Receiver | |
| RF Power Absolute Measure | 9 kHz to 50 GHz | -70 dBm to 20 dBm | Comparison to Measuring Receiver with Power Sensor | ||
| RF Power Source | 1 mHz to 20 MHz | -50 dBm to 20 dBm | Comparison to Signal Generator | ||
| 100 kHz to 50 GHz | -110 dBm to 10 dBm | ||||
| RF Power Meter Reference | 50 MHz | 1 mW | Comparison to Power Meter and Power Sensor | ||
| RF Power Sensor Calibration Factors | 9 kHz to 50 GHz | Referenced to 1 mW | |||
| Amplitude Modulation Depth Accuracy Measure | 150 kHz to 10 MHz (Rate: 50 Hz to 10 kHz) |
Depth: 5 % to 99 % |
Comparison to Spectrum Analyzer, Measuring Receiver | ||
| 10 MHz to 3 GHz (Rate: 90 Hz to 10 kHz) |
Depth: 20 % to 99 % |
||||
| 10 MHz to 3 GHz (Rate: 50 Hz to 100 kHz) |
Depth: 5 % to 20 % |
||||
| 3 GHz to 26.5 GHz (Rate: 50 Hz to 100 kHz) |
Depth: 20 % to 99 % | ||||
| Depth: 5 % to 20 % | |||||
| Amplitude Modulation Measure Flatness | 10 MHz to 26.5 GHz (Rate: 90 Hz to 10 kHz) |
Depth: 5 % to 99 % |
Comparison to PSA Series Spectrum Analyzer | ||
| FM Rejection (50 Hz to 3 kHz BW) |
250 kHz to 10 MHz (Rate: 400 Hz to 1 kHz) |
Depth: < 50 % Deviations: < 5 kHz |
|||
| 10 MHz to 26.5 GHz (Rate: 400 Hz to 1 kHz) |
Depth: < 50 % Deviations: < 50 kHz |
||||
| Residual AM | 250 kHz to 26.5 GHz | 50 Hz to 3 kHz BW | |||
| Harmonic Measurements | 30 Hz to 50 GHz | ≤ -80 dB to 0.1 dB | Comparison to Spectrum Analyzer | ||
| Harmonic Distortion | 20 Hz to 100 kHz | 0 dB to 100 dB | Comparison to Audio Analyzer | ||
| Frequency Modulation Deviation Accuracy Measure | 250 kHz to 10 MHz (Rate: 20 Hz to 10 kHz) |
Dev: ≤ 40 kHz |
Comparison to PSA Series Spectrum Analyzer, Measuring Receiver | ||
| 10 MHz to 26.5 GHz (Rate: 50 Hz to 200 kHz) |
Dev: ≤ 400 kHz |
||||
| Frequency Modulation Measure AM Rejection | 150 kHz to 26.5 GHz (50 Hz to 3 kHz BW) |
AM Depths: ≤ 50 % (Rate: 400 Hz or 1 kHz) |
Comparison to PSA Series Spectrum Analyzer | ||
| Residual FM | 100 kHz to 26.5 GHz | 50 Hz to 3 kHz BW | |||
| Phase Modulation Measure PM Deviation Accuracy |
100 kHz to 26.5 GHz | Deviations: > 0.7 rad Deviations: > 0.3 rad |
|||
| AM Rejection | 100 kHz to 26.5 GHz (50 Hz to 3 kHz BW) |
AM Depths: ≤ 50 % (Rate: 1 kHz) |
|||
| Residual PM | 100 kHz to 26.5 GHz | 50 Hz to 3 kHz BW | |||
| Amplitude Modulation Source | 10 kHz to 13.5 MHz | Rate : 50 Hz to 100 kHz Depths : (5 to 99)% | Comparison to AM/FM Test Source | ||
| Frequency Modulation Source | 10 kHz to 432 MHz | Rate : 20 Hz to 200 kHz Dev: ≤ 400 kHz peak |
|||
| Digital Modulation Source and Measure | EVM, Power Ramp Relative Accuracy | -0.11 dB ± 0.6 dB | Comparison to Signal Generator, Spectrum Analyzer | ||
| Phase and Frequency Error: | Phase Error | 0.01° to 180° | |||
| Peak Phase Error | -0.11 dB ± 0.6 dB | ||||
| Frequency Error | 0.001 Hz to 10 Hz | ||||
| Output RF Spectrum Relative RF Power Uncertainty | Due to Modulation Offsets ≤ 1.2 MHz Offsets ≥ 1.8 MHz |
-30 dB to 10 dB 1° to 15° 3° to 25° |
|||
| Due to Switching | -30 dB to 10 dB | 1° to 15° | |||
| Absolute RF Power Accuracy | 18° to 30° | ||||
| Excess Noise Ratio | 10 MHz to 26.5 GHz | ENR : 6 dB, 15 dB | Comparison to Noise Sources | ||
| S11 – Reflection Magnitude | 9 kHz to 50 GHz | Comparison to Network Analyzer, Calibration Kit and Verification Kit | |||
| S11 – Reflection Phase | |||||
| S21 – Transmission Magnitude | |||||
| S21 – Transmission Phase | |||||
| Ⅲ. Length and Dimensional metrology | Calipers | Up to 500 mm | Comparison to Gage Blocks | ||
| Height Gages | Up to 500 mm | Comparison to Gage Blocks, Surface Plate | |||
| Indicators | Up to 100 mm | Comparison to Gage Blocks | |||
| Micrometers | Up to 500 mm | ||||
| Ⅳ. Mass and Mass Related | Pressure | -15 to 10 000 psi | Comparison to Pressure Calibrator | ||
| Torque Tools | 0.01 N·m to 100 N·m | Comparison to Torque Calibrator | |||
| 60 lbf·ft to 600 lbf·ft | |||||
| Scale and Balances | 0 mg to 150 kg | Comparison to Standard Weights | |||
| Ⅴ. Photometry and Radiometry | Optical Wavelength Measure | 700 nm to 1 650 nm | Comparison to Wavelength Meter | ||
| Optical Power Measure | 850 nm | -60 dB to -6 dB | Comparison to Optical Test System | ||
| 1 310 nm | -110 dB to 10 dB | ||||
| 1 550 nm | |||||
| Ⅵ. Thermodynamic | Temperature Indicating Devices | -195 ℃ to 420 ℃ | Comparison to Standard Thermometer | ||
| Relative Humidity Indicating Devices | 10 % R.H. to 98 % R.H. | Comparison to Hygrometer | |||
| Ⅶ. Time and Frequency | Frequency Source | 0.1 Hz to 50 GHz | Comparison to GPS Receiver, Signal Generator | ||
| Frequency Measure | Fixed Point | 10 MHz | Comparison to GPS Receiver | ||
| Frequency Measure | 0.1 Hz to 46 GHz | Comparison to GPS, Frequency Receiver and Counter | |||
| Photo Tachometer | 0 to 100 000 RPM | Comparison to Waveform Generator, Multi-procduct Calibrator with LED | |||
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)