R&S HM7042-5 트리플 DC 전원공급기는 교육, 연구 및 설계, 유지 보수 및 수리, 제조 테스트에 이상적입니다.
모델명 | 출력 채널 수 | 최대 출력 파워 | 채널 당 출력 전압 | 채널 당 출력 전류 |
R&S®HM7042-5 | 1 | 155,5 W | 2 x up to 32 V, 1 x up to 5.5 V | 2x up to 2 A, 1x up to 5 A |
All functions can be operated from the front panel; separate rotary knobs for each channel to adjust voltage and current.
Because all channels are galvanically separated, they can be combined. In the parallel operating mode, channels can be bundled to achieve higher currents. In the serial operating mode, channels can be combined for higher output voltages.
All channels are galvanically separated and can be combined for higher voltage or current. For each channel you have separate voltage and current displays (4 digits at channel 1+3; 3 digits at channel 2).
Combination of primary transformer, secondary switching regulator and additional linear control reduces weight and size.
Electrical specifications | ||
Number of output channels | 3 | |
Total output power | max. 155.5 W | |
Maximum output power per channel | CH1, CH3: 64 W; CH2: 27.5 W | |
Output voltage per channel | CH1, CH3: 0 V to 32 V; CH2: 0 V to 5.5 V | |
Maximum output current per channel | CH1, CH3: 2 A; CH2: 5 A | |
Voltage ripple and noise (20 Hz to 20 MHz) | < 1 mV (RMS) (meas.) | |
Current ripple and noise (20 Hz to 20 MHz) | < 1 mA (RMS) (meas.) | |
Load recovery time*1) | < 30 µs (meas.) | |
Programming/readback resolution | Voltage | 10 mV |
Current | CH1, CH3: 1 mA; CH2: 10 mA | |
Readback accuracy (± (% of output + offset)) | Voltage | < 0.1% + 30 mV |
Current | CH1, CH3: < 0.1% + 4 mA; CH2: < 0.1% + 40 mA | |
Special functions | ||
Measurement functions | voltage, current | |
Protection functions | OCP | |
FuseLink function | always linked | |
Fuse delay at power-up | - | |
Sense function | - | |
Sink mode | - | |
Output sequencing | - | |
Trigger input/output | - | |
Arbitrary function | - | |
Analog/modulation interface | – | |
Data logging | - | |
Display and interfaces | ||
Display | 7-segment LED | |
Rear panel connections | ||
Remote control interfaces | ||
General data | ||
Dimensions (W × H × D) | 285 × 90 × 388 mm | |
Weight | 7.0 kg | |
Rack installation | R&S®HZ42 option | |
*1) 10% to 90% load change within a band of ± 20 mV of set voltage. |